High Temperautre Spring Disc Spring Wave Spring

Tsatanetsatane wa Zamalonda

Kasupe

Kutentha Kwambiri Spring:

Spring ndi gawo lamakina lomwe limagwiritsa ntchito elasticity kuti ligwire ntchito.Zigawo zopangidwa ndi zinthu zotanuka zimapunduka pansi pa mphamvu yakunja, ndikubwerera ku mawonekedwe awo oyambirira pambuyo pochotsa mphamvu yakunja.Amagwiritsidwanso ntchito ngati "spring".Nthawi zambiri zopangidwa masika zitsulo.Mitundu ya akasupe ndi yovuta komanso yosiyana.

Kampani Yathu Yogwirizana Ndi professonial Spring Factories Main Pangani ndikupereka Ma Springs otentha kwambiri

• High Kutentha Spring Zida:

Chithunzi cha SUS304,Chithunzi cha SUS316, SUS631/17-7PH, SUS632/15-7Mo, 50CrVA, 30W4Cr2VA,

Zithunzi za X-750, Mtengo wa 718, Nimonic90, Inoloy A286(SUH660)

• Mitundu ya Spring:

→Mitsinje Yopondereza → Kasupe Wowonjezera

→ Kasupe wa Torsion → Kasupe wopindika

♦ Spring Spring ♦ MpukutuKasupe♦ Chimbale Spring

♦ Kasupe wa mphete ♦ Kasupe Wowoneka Mwapadera, ndi zina zotero

Makina a Spring

 

Mitundu Yazinthu

Dzina lazinthu

Kutentha Kwambiri kwa Ntchito°C

chitsulo chosapanga dzimbiri

SUS304/SUS316

200

SUS631/17-7PH

370

SUS632/15-7Mo

470

Aloyi kasupe zitsulo

50 CrVA

300

Mtengo wa 30W4Cr2VA

500

Kutentha kwa nickel base alloy

Inoloy A286(GH2132)

600

Inconel X-750(GH4145)

600

Inconel 718 (GH4169)

690

Nimonic90(GH4090)

800 (γ<0.2)

GH4099

1000 (γ<0.1)

inconel 625 washer, Disc spring, gasket, mphete yolumikizira

♦ Zitsime za Disc

Amagwiritsidwa ntchito makamaka mu mavavu, ma flanges, zowomba, mabuleki, ma torque converters, High-voltage switch, bawuti kumangitsa, thandizo mapaipi, shockproof ndi minda shockproof.adapanga molingana ndi DIN EN16983 (DIN2093).

The awiri akunja ranges kuchokera 6mm kuti 1000mm.

Zida zikuphatikizapoaloyi zitsulo 51CrV4, mpweya zitsulo SK85, 1074;

• Chitsulo chosapanga dzimbiri ASTM301, 304, 316, 17-7PH, 17-4PH, 15-7Mo;

• Chitsulo chosagwira kutentha H13, X30WCrV53, X22CrMoV12-1, X39CrMo17-1;

• Kutentha kwapamwamba kugonjetsedwa ndi zitsulo zosapanga dzimbiri Inconel X750, Inconel X718, Nimonic 90, etc.

♦ Mitsinje ya Wave

Wave spring ndi chitsulo chopyapyala chooneka ngati mphete chopangidwa ndi mafunde angapo ndi zigwa.Mafunde akasupe amagwiritsidwa ntchito kwambiri mu mota, makina ansalu, zida zama hydraulic, magalimoto ndi mafakitale ena.Kuyika kwakukulu ndi mafotokozedwe (kukula kwadzina) kwa chipinda chonyamulira ndi choyenera.Kapena mu dzenje, malo oyikapo ndi ochepa, ndipo ali ndi ntchito yapadera yochepetsera phokoso ndi kuchepetsa kugwedezeka.

The awiri akunja ranges kuchokera 6mm kuti 1000mm.makulidwe osiyanasiyana kuchokera 0.4mm kuti 5.0mm.

Wave-kasupe-01

Chitetezo cha dzimbiri

  • Phosphating
  • Mechanical galvanizing
  • Nickel wapangidwa
  • Jiaomei

Iwo ali ndi makhalidwe ang'onoang'ono mapindikidwe ndi lalikulu katundu.Ilinso ndi zotsatirazi.

  • Ma diski akasupe amatha kupeza mawonekedwe osiyanasiyana onyamula kudzera mumitundu yosiyanasiyana ya inversion ndi kuphatikizika.
  • Poyerekeza ndi akasupe ena, akasupe a disc amatenga malo ochepa.
  • Pamene mapepala angapo amagwiritsidwa ntchito palimodzi, zotsatira zowonongeka zimawonjezeka.
  • Akagwiritsidwa ntchito moyenera, sangapunduke kapena kusweka.
  • Moyo wautali wotopa.
Zida Zamagetsi Ntchito Temp Kulimba kwamakokedwe Elastic Modulus KN//mm2 Chemistry%
°C N/mm2 RT°C 100°C 200 ° C 300 ° C 400°C 500°C 600 ° C C Si Mn P S Cr Ni

Ena
 
Chithunzi cha T8A SK85
-50 mpaka +100 1200-1800 206 202 0.80-0.09 ≤ 0.35 ≤ 0.50 ≤ 0.03 ≤ 0.03 ≤ 0.20 ≤ 0.25 Cu0.30
Chithunzi cha 50CrV4 SUP10
-50 mpaka +200 1200-1800 206 202 196 0.47-0.55 ≤ 0.4 0.71.1 ≤ 0.025 0.025 0.9 1.2 ≤ 0.4 Mtundu: 0.1 0.25Mo≤ 0.1 
C75 -50 mpaka +100 1200-1800 206 202 0.70-0.80 0.15-0.35 0.60 0.90 ≤ 0.025 0.025 ≤ 0.4 ≤ 0.4 Mo≤ 0.1 
60Si2Mn SUP6 -50 mpaka +200 1200-1800 206 202 196 0.56-0.64 1.50-2.0 0.6 0.9 ≤ 0.035 0.035 ≤ 0.35 ≤ 0.35  
X 10CrNi 18-8 SUS301 -200 mpaka +200 1150-1500 190 186 180 0.05-0.15 ≤ 2.0 ≤ 2.0 ≤ 0.045 0.015 16.0 19.0 6.0 9.5 Mo≤ 0.08 
X 5CrNi 18-10SUS304 -200 mpaka +200 1000-1500 185 179 171 ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.015 17.0 19.5 6.0 9.5 N≤ 0.11
X 5CrNiMo 17-12-2 SUS316 -200 mpaka +200 1000-1500 180 176 171 ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.015 16.5-18.5 10.0 13.0 Mo: 2.0-2.5N≤ 0.11
X 7CrNiAl 17-7 SUS631 -200 mpaka +300 1150-1700 195 190 180 171 ≤ 0.09 ≤ 0.7 ≤ 1.0 ≤ 0.04 0.015 16.0 18.0 6.5 7.8 Al: 0.7-1.5
X5CrNiCuNb 16-4 SUS630 -200 mpaka +300 1150-1700 195 190 180 171 ≤ 0.07 ≤ 1.0 ≤ 1.0 ≤ 0.035 0.03 15.0 17.0 3.0 5.0  
X8CrNiMoAl 15-7-2 -200 mpaka +300 1150-1700 195 190 180 171 ≤ 0.09 ≤ 1.0 ≤ 1.0 ≤ 0.04 0.03 14.0 16.0 6.5 7.75 Mo:2.0-3.0Al: 0.75-1.5
Chitsulo
Chithunzi cha X39CrMo 17-1
-50 mpaka +400 1200-1400 215 212 205 200 190 0.33-0.45 ≤ 1.0 ≤ 1.5 ≤ 0.04 0.03 15.5 17.5 ≤ 1.0 Mo: 0.7-1.3 
X 22CrMoV 12-1 -50 mpaka +500 1200-1400 216 209 200 190 179 167 0.18-0.24 ≤ 0.5 0.4 0.9 ≤ 0.025 0.015 11 12.5 0.3-0.8 V:0.25-0.35Mo: 0.8-1.2 
X30WCRV53 SKD4 -50 mpaka +500 ≥ 1470 216 209 200 190 179 167 0.25-0.35 0.15-0.30 0.20 0.40 ≤ 0.035 0.035 2.2 2.5 ≤ 0.35 V: 0.5-0.7       W: 4-5  
X40CrMoV5-1 SKD61 -150 mpaka +600 1650-1990 206 200 196 189 186 158 0.32 0.40 0.8 1.20 0.20 0.50 ≤ 0.030 0.030 4.75 5.50   V:0,80-1.20Mo: 1.1-.75 
Nickel
Zithunzi za X750
-200 mpaka +600 ≥ 1170 214 207 198 190 179 170 158 ≤ 0.08 ≤ 0.50 ≤ 1.0 ≤ 0.02 0.015 14.0 17.0
≥ 70
Co≤ 1.0 Ti2.25-2.75 Fndi 5.0-9.0
Mtengo wa X718 -200 mpaka +600 ≥ 1240 199 195 190 185 179 174 167 0.02 0.08 ≤ 0.35 ≤ 0.35 ≤ 0.015 0.015 17.0 21.0 50.0 55.0 V≤ 1.0Mo: 0.70-1.15 
Nimoni 90 -200 mpaka +700 ≥ 1100 220 216 208 202 193 187 178 ≤ 0.13 ≤ 1.0 ≤ 1.0 ≤ 0.03 0.015 18.0 21.0 Bali V15.0-21.0Mo: 2.0-3.0    Al≤ 0.2

♦ Zida Zazikulu za Kutentha Kwambiri za Spring: ♦

♦ 304 zitsulo zosapanga dzimbiri
Chitsulo cha 304 chosapanga dzimbiri chimapunthwa chifukwa chozizira kuti chiwonjezere zotanuka.Sizingaumitsidwe ndi chithandizo cha kutentha.Idzatulutsa magnetism panthawi yozizira.304 Chitsulo chosapanga dzimbiri chimakhala ndi kukana kwamphamvu kwa dzimbiri komanso zinthu zabwino zakuthupi.

 316 chitsulo chosapanga dzimbiri

Chitsulo cha 316 chosapanga dzimbiri chimapunthwa chifukwa chozizira kuti chiwongolere zotanuka, ndipo sichingawumitsidwe ndi chithandizo cha kutentha.Idzatulutsa magnetism panthawi yozizira.Chitsulo chosapanga dzimbiri cha 316 chili ndi molybdenum, chomwe chimakhala ndi kukana kwamphamvu kwa kutu kuposa 304 chitsulo chosapanga dzimbiri, ndipo chimatha kukana dzimbiri pakugwiritsa ntchito mankhwala.

 17-7PH (GH631, 0Cr17Ni7Al)

17-7PH kukana kwa dzimbiri kofanana ndi 304 chitsulo chosapanga dzimbiri, chomwe chimatha kuthandizidwa ndi chithandizo cha kutentha ndi kuuma kwa mvula.Imakhala ndi mphamvu zochulukirapo komanso zopatsa mphamvu.Kutopa kuli bwino kuposa 304 zitsulo zosapanga dzimbiri ndi 65Mn carbon steel.Ilinso ndi elasticity yabwino pansi pa ℃ chilengedwe.

 15-7Mo (GH632, 0Cr15Ni7Mo2Al)

15-7MoHas kukana dzimbiri kofanana ndi 316 chitsulo chosapanga dzimbiri.Ikhoza kuyambitsidwa ndi chithandizo cha kutentha ndi kuumitsa kwamvula.Ili ndi mphamvu zolimba kwambiri komanso zokolola, ndipo kutopa kwake kuli bwino kuposa 316 zitsulo zosapanga dzimbiri ndi 65Mn carbon steel.Ilinso ndi elasticity yabwino pansi pa ℃ chilengedwe.

 Inconel X-750 (GH4145)

Inconel X-750 ndi mpweya wa nickel-based precipitation kuumitsa ma deformation superalloy.Amagwiritsa ntchito r'phase ngati gawo lowumitsa mpweya wokalamba.Kutentha kovomerezeka ndi pansi pa 540 ℃.Aloyiyo imakhala ndi kukana kwa dzimbiri komanso kukana kwa okosijeni, ndipo imakhala ndi magwiridwe antchito otsika.

 Inconel 718 (GH4169)

Inconel 718 ndi mpweya wa nickel-based precipitation kuumitsa deformation superalloy.Kutentha kovomerezeka ndi -253--600 ℃.Aloyiyo imakhala ndi mphamvu zambiri pansi pa 600 ° C, imakhala ndi kukana kutopa kwabwino, kukana kwa radiation, kukana kwa okosijeni ndi kukana dzimbiri, komanso kumagwira ntchito bwino komanso kukhazikika kwadongosolo kwanthawi yayitali.

 A-286 (GH2132, SUH660)

Aloyi A-286 ndi mpweya wochokera kuchitsulon kuumitsa deformation mkulu-kutentha aloyi.Kutentha koyenera kogwira ntchito kumakhala pansi pa 540 ℃.Aloyi ali mkulu ndi otsika kutentha mphamvu ndi kukhazikika kwa nthawi yaitali, kukana bwino dzimbiri ndi matenthedwe mapindikidwe ntchito, ndipo ali wabwino processing plasticity ndi ntchito kuwotcherera wokhutiritsa.


  • Zam'mbuyo:
  • Ena:

  • Lembani uthenga wanu apa ndikutumiza kwa ife